F35 cutting head
The tree harvester machine is designed for R&D in timber felling, it is widely used in North America, Europe, Australia and other places. A forestry harvester is convenient for your business and greatly reduces drudgery.
The F35 trimmer head can be conveniently installed on different types of main engines. The most common prime mover is the 8 to 15 ton crawler excavator. At the same time, users can also select wheeled excavator of the corresponding tonnage or small and medium-sized forestry machinery.
- Display and emergency stop button
The cutter head is equipped with a special screen and mounting bracket, which is fixed in the main engine cabin to facilitate the operation of the driver. If an excavator is selected as the prime mover, it is recommended to stick the instrument mounting bracket to the glass on the right side of the cab. An emergency button will also be installed in the cab in an easy-to-operate position, so that it can be quickly turned off in an emergency.
- operating handle
The cutting head is operated by two electric control handles with one on the left and one on the right. When installed, replace the hydraulic handle head on the main motor with our support electric control handle. Usually, the electric control handle can be directly installed on the hydraulic handle of the main engine. If the size of the interface is inconsistent, a transition joint will be provided for adaptation.
Composition of the head
- rotary engine
- front fixed knife
- Front knife mechanism
- roller mechanism
- chainsaw mechanism
- measuring mechanism
- main frame
- rotation mechanism
Parameters of the F35 spindle
Characteristic | F35 | Unit |
felling diameter | 350 | millimeter |
Chainsaw guide plate length | 18 | inch |
chain pitch | 0.404 | inch |
Chain oil tank capacity | 3.4 | L |
Number of rollers | 2 | unit |
roller diameter | 371 | millimeter |
roll opening | 400 | millimeter |
roller max feeding force | 16KN | KN |
roll feed speed | 4.1 | m/s |
Number of knives (movable knife + fixed knife) | 2+1 | unit |
Blade tip contact environmental protection diameter | 330 | millimeter |
Front blade maximum opening | 480 | millimeter |
operating pressure | 22.5 | MPa |
flow requirement | 150-180 | L/min |
power requirement | 40-60 | kilowatt |
Control system | independent programming | |
retrofit excavator | 8-15 | ton |
Full width (close/open) | 900/1200 | millimeter |
Total length | 1500 | millimeter |
Total height | 1035 | millimeter |
Weight | 560 | kilogram |
▼ DOWNLOAD CATALOG ▼
