TROCK – WOOD SPECIAL EDITION

Drying wood is now more affordable and easier to achieve with TROCKNNER equipment.

The new TROCKNNER wood dryer model TROCK - WOOD SE is compact, high performance and capable of drying up to 640"/15m3/6,350BF of wood. In addition to being beneficial for your company, it helps the environment by reducing CO2 emissions by not burning fossil fuels.

Conventional heat pump components are made with galvanized steel covers and when subjected to high temperature and acidity of wood, these tend to corrode over time and the copper tube of the evaporator also corrodes, which can result in refrigerant leaks and loss of efficiency. However, TROCKNNER drying equipment is made of stainless steel and includes a special anti-corrosion coating on the evaporator, thus granting it superior resistance against corrosion. Solving this problem.

Each Special Edition dryer includes; TRK12R unit, an insulated aluminium drying chamber inside, air handling components, humidity sensors and PLC-based electrical controls with an intuitive operator display. TROCKNNER dryers are very economical and efficient, requiring only a small amount of electrical energy to operate, thus eliminating fossil fuel consumption and combustion emissions.

✓ 640"/15m3/6,350BF drying capacity.

✓ Includes 1 TRK12R

✓ 50 L/H drying rate.

✓ Operates on 380V/50 Hz 3-phase connection.

✓ Dry wood to 8% - 12% moisture content.

✓ Drying chamber operates with 4 fans

✓ Operates in environments between -5°C – 45°C

✓ Maximum operating temperature of 80°C

✓ Includes suitable baffle to facilitate air flow through the wood pile.

✓ Has the ability to perform heat treatment to set the tone, sterilize the load (kill insects) and preheat.

✓ Chamber built with 100mm polystyrene panel.

✓ Control panel 9-inch programmable touch screen.

✓ External dimensions of the drying chamber (length x width x height) 4,000 x 4,000 x 4,100 [mm]

Preview (AR)

Quality

Especial Edition models are built to last. Their service components are designed to be stable, efficient and save energy. In addition, our fans provide proper air circulation ensuring uniform drying. The chassis of the machines can be made of stainless steel for corrosive products and our control system allows you to program multiple drying stages.

Service

Everything in the TROCKNNER dryer is replaceable. It is not a disposable product. In addition, we provide technical support from the people who manufacture your machines and who work with the highest quality standards.

Customize your drying equipment

Our wood drying system can be purchased with all its components or individually depending on your requirement or implementation.

PRODUCT	ESSENTIAL	PRO	FULL
TRK12R	✓	✓	✓
Fans	✓	✓	✓
Ventilation duct	✓	✓	✓
Drying chamber	✘	✓	✓
Deflector structure	✘	✓	✓
Insulated concrete floor	✘	✘	✓
Installing the equipment	✘	✘	✓
Technical support	✓	✓	✓